Two Types---Matte\Glossy

Thickness: 18mic~28mic

ATTENTION: WHEN USING PRE COATED FILM, FIRSTDETERMINE WHICH SIDE IS THE BONDING SURFACE.USUALLY, THE SURFACE OF THE HOT LAMINATING FILMADHESIVE FACES THE CORE.

SPECIFIC JUDGMENT METHOD:GLOSSY TYPE: THE SIDE THAT CAN REFLECT LIGHT IS THEOUTER FILM SURFACE IN CONTACT WITH THE GLUEROLLER, WHILE THE SIDE THAT CANNOT REFLECT LIGHTIS THE INNER FILM SURFACE IN CONTACT WITH THEGLUE AND PAPER.

MATTE TYPE: MATTE FILM IS DIFFICULT TO DETERMINEAND CAN BE LOCALLY HEATED WITH AN OPEN FLAME(DO NOT IGNITE). THE STICKY SIDE IS THE INNERMEMBRANE SURFACE THAT COMES INTO CONTACT WITHTHE PAPER WITH ADHESIVE: THE NON STICKY SIDE ISTHE OUTER FILM SURFACE IN CONTACT WITH THE GLUEROLLER.

TIP: WHEN INSTALLING THE HOT LAMINATING FILM, THESURFACE THAT CAN BE BONDED MUST BE FACING AWAYFROM THE ADHESIVE ROLLER,