Glass bead filler increases mechanical strength and dielectric strength.
Products coated with resin can be provided.
Custom filler concentrate with up to 75% load in all thermoplastic materials.
Multi-function concentrate can contain a variety of additives.
Advanced Ceramics Company
Boron nitrogen powder is said to be an excellent polymer material additive for applications that require very low heat resistance.
It provides resistance and dielectric constants that are lacking in other high thermal conductivity materials.
The form of boron and nitrogen powder is platelet-like.
When used as an additive in a polymer, this property provides excellent thermal conductivity measurements, which are said to be superior to other ceramic electrical insulation materials due to platelet structure.
Applications where the heat dissipation requirements continue to increase will see the results of improvement and the increased use temperature with the addition of boron and nitrogen.
Boron nitrogen has excellent lubrication properties, providing a lower friction coefficient and reduced wear when used as an additive.
It can also be effective as a nuclear agent or as a processing auxiliary agent.
AGRASHELL, INC. Walnut-
Low shell powder-
Density filler for phenol and cast polyester.
Standard Grade (WF-5, -200 mesh; and WF-7, -325 mesh)
Light color, free-
Flow, non-toxic, low Resin Demand, easy to disperse. AKROCHEM CORP.
The fillers include calcium carbonate, kaolin soil, alumina trihydrate, wood and fiber groups, wood flour, micas, magnesium carbonate and precipitated amorphous silica. ALUCHEM INC.
Grind hydrated alumina, calcium carbonate, and magnesium oxide fillers. Twenty-one particle-
The size distribution is subtracted from 65% to 100% from the 325 mesh and the median particle size is 2. 5 to 30 microns. Also super-
Fine Grinding filler with a median particle size of 1.
Top sizes of 5 microns and 10 microns or less, and a mixture of 12 grades of hydrated alumina/calcium carbonate. ACM-
MH 95 sodium hydroxide as flame-
Flame retardant filler that releases water-in-water like three-water alumina but is able to withstand processing temperatures up to 625 F. 425-445 F for ATH. Both 7-micron and 3-
Micron grinding with or without surface treatment.
Metal fiber USAStainless-
Steel, brass, lowcarbon-
Steel, long copper fiber-
Needle-strand fiber reel
Punch in blankets and chopped fibers.
It has high strength, high modulus, ferromagnetic properties, good corrosion resistance and high conductivity and thermal conductivity.
Hard, soft wood grade cellulose fiber and flour from American wood fiber.
Particle size from 10 to 200 (2000-45 microns)
In bulk or bagged form.
Benefits of using wood flour as an additive include increased dimensional stability, reduced thermal expansion, controlled shrinkage and warping, excellent volumeto-
The weight ratio improves the appearance of the \"wood\" surface, reduces the volume cost and reduces the wear of the mold.
Suitable for injection, extrusion, compression and rotary molding of thermoplastic and thermoplastic.
For use from 10%-
70% various resins including phenol, melamine, polyester, PS, PE, PP and PVC.
Best building products in AmericaMix custom-
Engineering, multi-component enhancement and filling systems are inert, inorganic and non-inertcombustible.
Formulated for high load (60-80% by volume)
Without sacrificing the physical and tensile properties of polyester, vinyl ester, epoxy and thermoplastic plastics. Cost-
Effective, can be poured, sprayed, squeezed or injection molded.
The sprayed compound does not need to be introduced.
Different systems provide different degrees of strength, reduced density, flame resistance and cost savings in applications such as gel coating backup, sandwich core, coating, tools and cast compounds.
Kobe Internationalpurity (99. 9%)
Sub-micron aluminum and calcined aluminum with a narrow particle size range.
Available in Alpha and gamma forms. Surface-
The area is 120 m²/g.
Burgess pigment company
Water, water and heat
Optical Silicon aluminum (clays).
Water and calcined soil provide physical strength, impact and pressure resistance. Custom silane-
Processing products from nylon to cross-linking PE applications.
For opacity and tone strength, Optiwhite and Optiwhite MX allow 50% reduction in [TiO. sub. 2]loadings. Burgess No.
30 p and 30 p in PVC have high resistivity.
Maximum length of voltage cable
Term wet resistance. CABOT CORP. CAB-O-SIL DIV. Cab-O-
Silica processing aids, contact agents and viscosity by Sil gas phase method-
Control agent in Unsaturated Polyester, epoxy, silicone rubber and PVC.
Control the viscosity of polyester and prevent sagging or running in gel coating and laminated resin.
In the liquid resin system, it also helps to suspend or even disperse the solid.
In PVC plastic and pressure extension, the gas phase method silica absorbs an excessive amount of plasticizer, provides contact modification, prevents plateau formation, and maintains the freedom of dry compoundsflowing.
The dielectric properties and thermal stability also make it a suitable reinforcement material for silicone and PVC electrical insulation. CANCARB LTD.
In the absence of oxygen, the hot carbon black produced by thermal decomposition of natural gas has a low-
Horizontal structure and large granularity in several levels.
In the case of not reducing the performance of the polymer, it can be composite under high load.
Provides very low wear, good dielectric properties, chemical and heat resistance, and low screen slag values (
Usually at 325 mesh 2 ppm).
Applications include XLPE wire and cable insulation, heat
Shrink connectors and general pigmentation.
Solid glass spheres of various sizes enhance and expand all Thermoforming and Most thermoforming materials for injection molding, extrusion, compression molding and open moldingmold casting.
Treated with silicon or other coatings.
Say the situation of increasing flow and extrusion;
Improve the compression strength, stiffness and wear resistance;
Reduce creep, water absorption and shrinkage;
And provide better mold filling and more uniform cooling, which can shorten the injection cycle by 20%. CELITE CORP.
Silica Earth (diatomite)
Used as a blocking agent in low density polyethylene, llannan and high density polyethylene films.
The usage level can be from 0. 1% to 1%.
Calculated by weight, the ingredients can be made well at a level of 50%.
The Super floss Grade provides good optical performance at an economical cost.
Mining Division of cement company.
Mediterranean carbs white, dry
Ground limestone (
Used to fill in thermoplastic plastics and composites, including grades with a dry brightness of 86-
90 and granularity of 68-
99% through 325.
Almost any fiber filling of natural or synthetic fibers (
Cotton, nylon, polyester, PP, artificial silk, acrylic, fangzu). Both random-and precision-
Cutting types are available.
Composition materials company, INC.
Organic fillers include flour and sand nut shells of various mesh numbers;
Bleached and unbleached cellulose sheep;
Treated alternatives to cellulose K asbestos;
40-hard and soft wood flour325 mesh;
Recycled rubber dust;
Flour and grain crust;
Flour and corn sticks. Plasti-
Sand cross-linked polymer fillers available in urea, polyester and melamine for compression molding and extrusion.
There are also hollow and solid spheres of glass and ceramics.
Custom grinder sales Co. , Ltd.
Three-water alumina and calcium carbonate grinding.
Custom grinding and/or mixing are available.
Surface Modification of three-water alumina was also carried out.
Products packed in 50-pound bags, 2000-pound bulk bags or bulk trucks. DEGUSSA CORP.
Aerosil 130, 200, 300, and 380 pyrotechnics phase method Silicon is a contact agent and enhanced filler for silicone rubber and is used as an additive to prevent the platform from falling off in the calender PVC.
Aerosil R 972 drain pyrotechnics silicone is an enhanced filler for silicone rubber and is also free of charge
Flow additives used for moisture collection that can cause agglomeration problems.
Alumina is an electrical resistance agent for granular plastics.
Sipernat 22LS, fm500ls and Sipernat 44 precipitated Silicon is a blocking agent in the blown PP film (
In addition, Aerosil OX50 and microsphere FLM).
Sipernat 22LS and fm500ls are also used to prevent the platform from falling off in the PVC calender film.
Sipernat 22, 50 and 50 S are auxiliary tools for anti-knot blocks and can also be used to convert liquids into simple-to-
The hydrophobic Sipernat D17 and D11 are anti-Junction agents for very moisture-absorbing powders, and the FT 40 and FK 160 are reinforced fillers in silicone rubber. D. J.
Enterprise Co. , Ltd. Sillum-
200 Q/P treated non-combustible, chemically stable inert alumina Silicon beads to eliminate any organic tramp elements that may alter performance. Free-Flowing Bead (standard 44-
10 micron screen analysis)
Easy to mix with liquid or powder.
The product is not dissolved, does not touch, does not absorb moisture;
Excellent suspension and dispersion performance;
Increase the hardness.
Metal beads in 44-
Used for 10 microns of extra weight, such as nylon weights or compounds for lawn furniture.
Also used as an anti-static additive. Micro-P light-
Weight resin extender, 8-
10 lb/cu ft, is a non-combustible, chemically stable, inert amorphous mineral silicate.
It reduces shrinkage and temperature, does not conduct electricity, is compatible with flame retardant and does not dissolve in water and organic acids.
With high filling
Loading capacity and low moisture, no contact and no moisture absorption. DODGE-REGUPOL, INC.
Cork in the form of spherical, cube, fine length and chopped is an inert filler used to reduce cost and density, increase viscosity and increase dimensional stability and friction coefficient.
Particle size of 1 in.
Grid and density between 3-15012 lb/cu ft.
It is reported that heat, acoustics and impact can be increased
Absorption properties when sufficient quantities are used.
Dry Branch KAOLIN soil CompanyHydrite water-
Suitable for hot forming and hot plastic washing of different particle size of the clay plate.
The pH control of the grade guarantees proper curing and stability.
Glomax calcined Earth booster has the best electrical properties in wire coatings. Partial [TiO. sub. 2]
It is said that in many paper and molded products with NeoGen or Altowhite high-replacement is possible
Kaopaque deammonia silicon aluminum is reported to provide better physical properties in most thermoplastic materials.
Eagle Quality Products Co. , Ltd. , INC.
The Eagle M series is white and compatible with all plastic systems for use as an enhanced filler in all thermoplastic and thermosolid resin systems.
It produces clean, consistent colors, especially in polypropylene and thermoplastic polyester.
Eckart america lp conventional and ash removal atomization and Flake alumina powder improve physical properties and processing properties.
Ecossais llc series products enhance the degradation of plastics using oxidation or photo degradation additives or a combination of both.
When plastic products are properly compost or exposed to UV light, the product accelerates degradation.
Emerson and Kangming Composite Materials Co. , Ltd.
The Eccosphere line of the hollow composite macro ball has a median diameter of 0. 5 and 2 in.
The average density range is from 0. 20-0. 40 g/cc.
They can provide weight reduction, heat insulation and sound insulation, and mechanical performance control.
Typical applications include syntactic buoyancy and insulation, evaporation control, and tools.
International ENDEX Endex MP metal
High filling of plastic compounds in various thermoplastic carriers (up to 93%)
Various metal powders.
Compounds include copper
Nylon, stainless steelHDPE, and iron-acetal.
Products for applications such as injection molding jewelry, containers, gears and conductive compounds.
, Appearance/performance technology mineral enhancement materials include Translink surface-
The modified clay is calledized. inert, fine-
Low residue, low moisture particles Satintone calcined soil booster and booster;
ASP, Buca and Catalpo aqueous kaolin soil with various particle sizes and modifications, including surface treatment and stripping;
And Emcor 66 ultra-
Short tendrils used in phenol mold compounds for brake pads and non-asbestos liners. Wet-
The ground White Cloud mother film consists of tiny, extremely thin flakes of potassium/Al-Si crystals and traces of other elements.
The flakes are silver and come off.
White with an average thickness of 0.
5 to 2 Micron, 2 to 150 micron diameter.
Normal 100, 160 and 325 mesh and 1000-
Number of entries and a more detailed special level.
Stiffness, modulus, yield stress, fracture stress, and heat can be increased-
High dielectric strength and flow coefficient make it very useful in electrical applications. EXPANCEL INC.
Super hot plastic ball
Light weight, flexible, flexible.
The average density is between 0. 025 and 0. 060 g/cc;
Average particle diameter.
20 to 140 microns.
It has uniform battery structure and compatibility with resin such as PUR, epoxy, PVC and PE.
It is also used in polyester as a lightweight filler to provide sufficient flexibility for the composite to reduce cracking and brittle.
But in-situ foaming.
RIM\'s applications include Expancel du (Dry without expansion)
Achieve the target density and reduce shrinkage.
PVC plastic film uses uniform, controllable void in foaming.
Grade provided at an expansion temperature of 176 to 400 F
Fiber Sales & DevelopmentSolka-
The abrasive cellulose filler improves the impact strength and wear properties of the moving parts.
Low specific gravity, controllable volume, good thermal performance.
It is reported that the filling of urea compounds can withstand a temperature of 170 F;
Melamine compound is resistant to 210 F;
Phenol with darker colors even requires a higher temperature.
Franklin Industrial & Mineral Products DepartmentAmical NSF-
Calcium carbonate listed in a range of particle sizes includes surfaces-
This oolite material can be used in vinyl, polyester and polyurethane to minimize mold wear.
Three water compounds of alumina are also provided.
Fujii American companyHigh-
Purity alumina powder and CMP Slurry.
Custom Supertight particle-
The size distribution is reduced to Micron.
GLITTEREX CORP. Precision-
Flash with high cut aluminum
The temperature coating produces special visual effects in injection molding, extrusion and blow molding. W. R. GRACE & CO.
Grace davison Syloid and Sylobloc are used for pure, chemical inert, non-toxic synthetic amorphous silicon of PVC, PE, PP, PVDC, EVA and other polymers.
The concentration is from 0 when used.
From 25% to 3%, they act as blocking agents or CoF modifiers, processing aids to prevent powder lumps and Taiwan.
Also promotes enhanced ink acceptance for printed images.
The size distribution and good particle integrity are high-clarity films.
Compared with the addition of two or more functional additives alone, the combination of Sylobloc silicas and sliding additives or other additives showed better benefits.
COFCO Mining Co. , Ltd.
Dicaperl hollow glass Pearl Rock sphere improves impact resistance and mechanical processing performance in some formulations, especially in light-weight cultured marble and polyurethane applications, and reduces weight.
The secondary silica filler, which is mainly used for PE film anti-blocking, helps to reduce weight, increases impact resistance through non-directional reinforcement, and provides dimensional stability. The molding of cellulose fiber filler in silica soil has been improvedTHE C. P. HALL CO.
The fillers include micas and clay. J. M. HUBER CORP. CHEMICALS DIV.
Zeothix precipitate hydrated silicon to provide contact and viscosity control.
Zeothix 265 prevents sagging or running during curing of polyester laminating resin, gel coating, epoxy and PVC plastic and coating.
Helps to suspend and disperse solid fillers in liquid resin.
As a processing aid for PVC plastic and calender, it can prevent plate-
Out, dry the excess plasticizer and act as a free
A flowing conditioner that dries compounds easily to block or stick together.
There are also ante and anti-blocking performance. J. M. HUBER CORP.
Engineering Materials function filler/estenders include calcium carbonate with particle size from 1. 0 micron to 40-mesh granular. Surface-
The treated material improves dispersion and allows for increased filler load.
W series for SMC, BMC and RTM. NSF-
Approved PVC pipe grades and PVC products are available (
Flexible, rigid, plastic, floor tiles)
Polyester, epoxy, rubber and polyurethane. New surface-
The treated highlight grade of olefin includes one-
Micron products for film. Water-
The washed and roasted silicon aluminum salt reduces the cycle time, extends the resin without sacrificing physical properties, and reduces the pound-
Reduce mold shrinkage and creep, increase heat
Deformation temperature, electrical properties, surface finish and printing suitability.
Aluminum Magnesium carbonate grade used as acid cleaning agent in olefin.
The fine granularity makes Hysafe products suitable for film applications and injection molding.
Adding aluminum and magnesium compounds to PVC can improve the performance of mixed resin
Metal stabilizerA surface-
The treated Lithium sulfate has better flow performance, reduces the compound torque and improves the dispersion.
Precipitate Silicon for contact in paint and heat-solid resin systems.
IMERYS pigment and additive Department
Special calcium carbonate and kaolin Earth products include film Link series designed to improve the stiffness of impact tear strength and enhanced bubble cooling.
For olefin injection molding, proprietary additive technology can reduce the cycle time by 40%. Camel-
Cal ST provides superior impact strength and processing performance under high loads of vinyl siding.
In wire and cable and rubber applications, the Polaris range of partial kaolin Earth and calcined Earth products provides dimensional stability and excellent electrical performance.
The InFilm product line is a cost-
Effective anti-blocking agent in the application of polyester film.
Finely ground crystalline white marble filler with a high percentage of calcium carbonate specially designed for polyester, PP, PVC, epoxy and elastomer. Stearate-
Approved high coating grade
Drinkable pressurewater PVC pipe.
It is also a few grades of three-water alumina. K-Company T. DIV. OF KENTUCKY-
Tennessee Clay Company
Particulate filler for coating, silicone rubber, polymer, sealant and adhesive applications.
Mingshi 3, 4, 7 and 10 feldsp stones are low-
Color strength, stain resistance, high load capacity and excellent wear resistance are reported.
Professional and commodity story products for luzenac america pp, copolymer, mPP, TPO, HCPP, HDPE, nylon, select sets and recycled polymers, including polymers for plastic wood.
The product range includes Cimpact ultra-fine products, Jetfil macro Crystal talcs, Vertal coarse macro Crystal talcs and Mistron microcrystal talcs.
Surface Modification grades are also provided.
Novacite silica product is an average particle size of 3-7 microns.
Unlike other silica stones, Novacite has low adsorption properties and low grinding properties.
Used as an extender/filler in silicone rubber, various thermostats, and engineering thermometers.
The modified silica enhancements can be treated with silicon, titanium salts, aromatic nitrogen compounds or glass resins. Other surface-
Three-in-one for modified inorganic fillers, pigments and fillers (
Three-water alumina), Monykup (antimony oxide), Titankup (
Titanium dioxide), Wollastokup (wollastonite), Carbokup (
Calcium carbonate), Silikup (silica), and Klakup (
Silicon aluminum). THE R. J. MARSHALL CO.
Calcium sulfate (ATH)gypsum)
Calcium carbonate and light filler.
Provided separately or in combination with guaranteed properties such as viscosity, gel time and color. Special-
Effect filler that can be used for casting polymer products.
It is also used in the manufacture of spray filler systems for high quality gel coating, acrylic or laminated structures.
Benefits include reduced resin consumption and reduced glass usage.
Martin Marietta Materials, Shell Products DepartmentSF-
4 crushed and graded soft animal shells were 97, respectively.
5% calcium carbonate. SF-4 is a general-
The purpose is called a well-dispersed filler that provides smoothness for the extension and extrusion products, with less performance loss compared to other similar sized fillers.
Millennium Special Chemicals Co. , Ltd.
Silcron amorphous, fine-
In addition to maintaining the finish and finish, the granular silica gel of various grades can also be used as a stylus and flat agent.
Improve paint dispersion and moisture control;
Eliminate blocking and board-out;
Increase the resistance of March or the acceptance of pencils and inks;
Ensure that the flow of dry powder is smoother and uninterrupted.
An average of 4 to 8 microns of non-toxic, chemical inert powder can be dried and mixed with a resin or pigment powder, compounded into a resin melt, or added to a parent or concentrate.
Compatible with a range of thermoplastic plastics. MILWHITE, INC.
Mineral Fillers/fortifiers include spar, calcium carbonate, attapulgite stick Clay, bentonite clay, and clay. Baryte high-specific-
Gravity filler can be used for sound elimination and acid resistance, and can also be used in foam and plastics that require weighing performance.
Heavy words are white and white. white. Custom-
Design products are available. P. J.
Murphy forest products
Hardwood and Cork flour of various mesh (
Inventory from 20 to 100 items).
The package includes bulk railcars, bulk trailers, 1000-pound bulk bags and 2.
34 cu/ft paper bags for pallet and stretch packaging.
Nano-particles produce nano-particles
Clay thermoplastic composites, including clay and aluminum layers
Its individual platelets are silicate measured in the order of 1 micron diameter.
Give them a aspect ratio of about 1000:1.
It\'s also a new Nano.
Clay grade, South omer I.
It is reported that the 24TC allows the compound to produce nylon 6 compounds with a bending modulus and an HDT of about 90%reactor blends.
Nano Materials Company
Production and sales of Nano
Inorganic and Organic powders (nano-
Phase, nano-Crystal, sub-micron, ultra-fine, nano-particles, nanotubes, quantum dots, and nano-objects).
Nanova llc provides talc and calcium carbonate nano-powders for plastic and nano-composites.
Nano talc and nano ocalc fillers can be used for olefin, ABS, acetate, PVC, TPEs and heat-solid polyester SMC.
It is said that larger particles, compared to conventional fillers, are able to produce compounds with higher strength and stiffness and better heat and creep resistance under lower loads.
These products are also considered to be better core and polymerization additives than traditional additives.
In the longest dimension, the average particle size of the Nano talc is 100 nm.
The average size of NanoCalc is 50 nm. Unlike nano-
Clay used in plastic nano-composites, nano-talc does not need to be peeled off.
It is said that the load as low as 5% is valid.
NYCO produces untreated and surfaces of different grades
A naturally occurring white non-metallic mineral with a needle-like structure.
Effective, functional filler and reinforcement materials for improving mechanical and physical properties in hot-solid, thermoplastic and elastic applications.
A generation of fines was offered. diameter, high-
Aspect ratio grades show excellent balance in bending, impact, and melt flow in case of reduced raw material/unit cost.
Certified by ISO 9002/9001. OMYA INC. Dry-and wet-
Grind calcium carbonate. Wet-
Fine and ultra-fine grade ground omyb B with or without surface treatment is a highpurity, high-
Brightness grade for rigid and flexible PVC siding, piping, profiles, calender and wire/cable compounds, olefin film and injection molding. Dry-
Ground sticky worms with an average diameter of 5 to 20 microns.
It is used for plasticizing PVC, polymer, epoxy, PUR and polyester. OPTIMER, INC.
Micropoppers is month-
6 Micron hollow polymer micro sphere, when heated to 265-, its volume in the resin matrix expands to 10 times the original300 F.
It can be made from a variety of resins, including plexiglass, PVDC, or SAN.
The density of unexpanded is just over 1. 0 g/cc.
Depending on the wall thickness and the coating used, the expansion density can be from 0. 02-0. 03 g/cc to 0. 15-0. 22 g/cc.
The product has been used in PS and PVDC.
It can also be provided in an expanded form under the name Polymicroshells.
This pouring filler can be sprayed and pumped at high shear and pressure. PACER CORP.
Marble and Quartz mineral fillers for plastic and paint applications.
Plastic colors and composite concentrates contain different levels of clay and talc for plastics, olefin and most other thermoplastic plastics.
Polar Minerals Corporation
Advanced products of high purity and low grade
Iron, high, high
White sulfur dioxide for high purity calcium carbonate, golden cloud stone micas and grinding
The auto market is a focus.
Strict SPC/SQC procedures ensure consistency. POLYONE CORP.
Distribution group special additives are concentrated in the form of solid or liquid, with or without pigments, and can contain fillers and other additives.
Porter Industries Limited
Solid and hollow glass spheres improve processing and flow, reduce costs, and produce molded parts with stable dimensions.
The maximum bonding with the resin was obtained and the performance was improved by coupling agent.
Balls help to disperse and reduce the orientation of fibers in glass
Fill compound. Silver-
Coated sphere for electrical and EMI
Shielding Applications. PQ CORP. Q-
Cel hollow balls are mainly low-
Density filler/booster for hot solid resin.
Can be used in polyurethane, plastic, polyester casting, spraying
Up, SMC, BMC and composite foam.
Advantages include reduced part cost and/or weight, improved structure and performance.
Application including simulation
Wooden Furniture accessories, ship structure, synthetic marble, body, bowling
Ball core, SMC and FRP panels and other composites.
Glass and Ceramic microbeads can be provided in a certain particle size and density range. Also surface-
Hollow ceramic sphere modified using patented surface-
Modify the technology.
There are three levels of 57-to 100-
The average particle size of Micron and 0.
200 foam and 100-
Average micron size and 0.
Liquid resin uses 24 density.
Magnesium oxide and magnesium carbonate provided by Shangpin Chemical Co. , Ltd.
Manufacturer and value of advanced materials-
Custom processors for metal, alloy, mineral, composite, Nano, aluminum and intermetal compound particle fillers and enhancements have been added
The product can be made almost 100% pure products, and the size can reach 10 Egyptian (nominal).
And chemical surfaces.
Modified fillers, platelets, fibers, needles, balls (
, Conductive additives, boron compounds, carbide and nitrogen oxides. J.
RETTENMAIER natural fiber manufacturer in the United States, the company has introduced a new technology based on new wood fibers and compounds for injection molding and extrusion.
The product allows the processor to manufacture thermoplastic-
Fill the base profiles of up to 90% wood fibers.
RMC Industrial Co. , Ltd.
Sodium hydroxide filler is reported to improve smoke suppression in PVC, EVA and PE. Magnum-White and MGH-
93 is ground to an average particle size of 2, 10 and 30 microns. Magnum-
White contains at least 35% sodium hydroxide and MGH-
93 minimum 85% (average 93%).
It is reported that the demand for antimony oxide has been reduced or eliminated. H. M. ROYAL INC.
Mineral fillers include products less than 0.
1% free crystalline silica, surface-
Treated calcium carbonate with a particle size of as small as 0.
The 04 Micron average presents unique thickening and strengthening opportunities.
The combination of hydrophilic gas phase method silicone and standard water phase method silicone is formulated. Flame-
Flame retardant packaging includes new sodium hydroxide, antimony oxide, hydrated alumina and a variety of pre-
Compound mixture of plastic. Calcium-
The Carbonate coated plastic ball can be formulated to withstand temperatures of up to 350 F and has a lightweight potential.
In order to facilitate dispersion, but also to have a high enhancement capacity, Fangfang fiber is now available in an open form. SAINT-
The goban advanced ceramic structural ceramics group supplies bn powder, which provides thermal conductivity and lubrication properties for plastics. SEEGOTT INC.
Provide silica soil, synthetic calcium silicate hydrate, calcium carbonate, talcs and surfaces-
Treated calcium carbonate and talcs, plus a series of atomised powder for aluminum sheets.
Shamo Packing Co. , Ltd. , INC. Carb-O-Fil is a low-
Cost, black, inert carbon filler, grinding from anthracite with a specific gravity of 1. 47.
Easy to disperse for PS, phenol, polyurethane coating and polyester.
Three-water alumina, calcium carbonate, magnesium hydrogen and talc filler.
Services include custom mixing, custom coating filled with hard grease, and matching particles-size ranges. SILBRICO CORP. Sil-Cell low-
The density, hollow inert filler replaces six times its weight in the resin and can be used to replace up to 40% of the resin in the compound.
The average particle size of this foam mineral filler is 45-
75 micron, usually used for epoxy resin, polyester culture marble, glass fiber reinforced plastic bathtub/shower, decorative board, joint compound and furniture components.
Can be pumped and sprayed in a liquid resin system.
Viscosity can be controlled by various surface treatments.
Explain the industrial company.
PMF fiber filler/booster can generally improve performance and/or reduce costs (
Compared to grinding glass)
Nylon 66, PP, phenol, and pet.
It can be used more than short asbestos fibers without causing excessive viscosity and can be added with other dry ingredients.
The PMF fiber consists of short fibers for filling at the inner angle of the molded
Hole area and molding
Usually the pin area of the fiberpoor.
The change in fiber length allows it to flow with the resin and reduces the flow
Southern Clay Products Co. , Ltd.
Hydrophilic and organic flow additives for a wide range of industrial applications, including paints, paints, oils, plastics, inks, adhesives, caulkers and sealant, as well as individuals-and household-care products.
Bentonite minerals are used as building materials for the manufacture of water and solvents
Based on the additive.
The product is a good impact modifier, hot
Distortion modifier, mineral functional filler, contact agent and thickening agent.
Also supply Nano
Clay suitable for Nano
Professional Mineral CorporationSUB.
Mineral Technology Co. , Ltd.
Mineral filling products include ABT resistance
Block talcs for providing a balanced olefin film with blocking efficiency, optical properties and ease of handling.
Multi-block and micro-block talcs minimize the absorption of expensive formula additives.
Improved reinforcement talcs with enhanced shock/stiffness balance, excellent length
Thermal stability, excellent color and color uniformity. Super-Pflex and Ultra-
Precipitated calcium carbonate (both with 0.
Average particle size 7 microns)
Widely used in hard PVC applications. Super-
While maintaining the critical performance of PVC siding and profiles, Pflex provides higher loading levels and reduced recipe costs. Ultra-
Pflex enhances the impact strength and surface appearance of extrusion and molded parts.
ViCron grinding calcium carbonate products and coatings Hi-
Pflex, PFinyl and Super-
The Fil features controlled particle size, high brightness, low resin requirements and easy handling.
Applications in flexible PVC compounds, specialty olefin and calender vinyls.
Department of Special ChemicalsLow-cost, medium-to-large particle-size surface-
Modified silicon improves stain resistance, wear resistance and weather resistance. F-200 (70-75 mesh), and F-400 (42-45 mesh)
Silicon allows a very high load without serious loss of physical or chemical properties. F-
The series silicone filler is compatible with FRP backup layers, gel coatings, epoxy flooring, and other hot and thermoplastic materials.
F-epoxy and polyester400 an F-
200 replacement of resin up to 75% can replace glass beads and spheres. F-1200 and F-1500 are high-Surface purity-
Modified grinding silicon with multi-functional surface properties.
Provide strong, dense and chemical
Resistant to composite materials.
Compatible with many polymers such as polyester, PE and PP.
Provide consistent batch Whiteto-
Uniform batch color. SUPERMIN DIV. DIV. OF GEORGE C. HAWLEY & ASSOC. High-
Aspect ratio of surface-
The processed synthetic cloud mother film.
Black, red, gold, silver and bronze.
Graphite flakes, powders and expandable graphite for fuel cells.
3 m professional materials provide hollow micro glass balls with an average particle size of less than 70 microns.
Control the density, intensity, accumulation fraction, particle size and percentage of floats.
Scotchlite glass bubbles are reported to allow the synthesis of compounds or composites at optimal cost, weight, texture, shrinkage and polishing time.
Enhanced potential includes wearand corrosion-
Resistance, gloss control, hardness, low viscosity and reduction of VOCs for industrial coatings.
Applications include automatic
Car body putty, automotive plastic, polyurethane foam, polyester SMC, BMC, spray-
Get up, lay your hands on-up.
Zeosphere thickwalled, high-compressive-
The strength, very fine particle size ceramic Micron balls are used as SMC, BMC, RIM, RTM, compression molding, injection molding, extrusion molding, and filling/casting.
A wide range of particle sizes, including grades that are fine enough, can be used as a blocking agent for the film.
The product helps with high filling volume, increased flow rate, increased surface finish and hardness, and reduced shrinkage and warping. Also offers Z-
Light Ball, low balldensity (0. 6-0. 7 g/cc)
Hollow ceramic balls of medium strength (3000-
Compression strength of 4000 psi)
Reduce the density and improve the performance of cultured marble, SMC and BMC.
Used for composite foam, marine building materials, engineering and aerospace composites, as well as lightweight molded parts.
Color Company TEKNORDIV.
Teknor apex co.
Mineral filler concentrate can be used for a variety of thermoplastic resin carriers and various filler loads.
Custom filled concentrate added and processed-
Assistance package provided. TRANSMET CORP.
Aluminum sheets and fibers for plastics requiring conductive and/or thermal conductivity.
EMI shielding, static and heat dissipation applications.
There are also zinc flat fibers for floor Static dissipation. UNIFRAX CORP. FIBERS DIV.
Silicon fiber reinforced filler with low thermal expansion, thermal stability, corrosion resistance, wear resistance and moisture resistance.
Various length, diameter, surface area and chemical properties modified by surface treatment.
Huimin special Minerals Co. , Ltd.
It offers silica, charades, and stone. Whole-
The polyester and epoxy system provides particles and ground silica. High-
For the thermoplastic plastic that is important in color, the quality Xiashi syenite is very good.
Xiashi is also used in PVC and polyester gel coatings to maintain the clarity of the color, as well as BMC for stain-resistant patio furniture or microwave cookers.
It is also a mature anti-block of PE, where clarity is important. U. S. GYPSUM CO.
Water-free calcium carbonate of two sizes: Snow filler (8-micron average)and CA-5 (2-micron average).
Snow filler is mainly used for PVC resin, plastic and BMC.
It is especially useful when it requires acid resistance, high load and white. CA-
5 is successful in thermal solid polyester for electrical applications.
Both of these fillers can be used to extend rigid and flexible thermoplastic materials, as well as reinforced and unreinforced thermosolid materials.
They are soft (2. 5 to 3. 0 Mohs scale)
, Which causes the equipment to wear less and the color is very white (
Average 98 on Beckman scale). CAS-20-
Waterless calcium salt is a very white filler subdivided into particles with an average particle size of 4 microns and a top particle size of 20 microns.
Manufactured by controlled roasting, fine grinding and high air separation
Pure gypsum rock.
The roasting process greatly reduces its moisture affinity.
It is recommended for hot plastic, hot plastic and plastic film.
Approved for food
Packaging application, because of its high purity, food-Acid resistance.
Suitable for plastics that require high fill load and balance physical properties.
Due to its high brightness, titanium dioxide can be partially replaced. U. S. SILICA CO. Min-U-
Sil particulate silica of top size from 5 microns to 40 microns; Sil-Co-
Sil groun silica of top size from 40 microns to 125 microns; and Snow-
3. Tex calledated clay. Min-U-Sil and Sil-Co-
Sil contains at least 99. 5% [SiO. sub. 2]
Used for products that require strict control of physical and chemical properties.
Durability and chemical inertia are suitable for epoxy and unsaturated polyester. Snow-
Tex, superior [TiO. sub. 2]
The extender of the PVC system has a high coverage capability, has ideal flow performance, and reduces the amount of expensive pigment required. R. T. VANDERBILT CO. , INC.
The average granularity of Nytal talcs for 5 grades is 2. 3 to 38 microns. Wollastonite (calcium meta-silicate)
Used in polyester, nylon and other resins.
Three levels are offered: Vansil W-10 (
2% reserved at 200 mesh), Vansil W-20 (
2% reserved at 325 mesh), and Vansil W-30 (0.
06% reserved at 325 mesh).
Clay products of different particle sizes include Dixie Clay (0. 2-micron average)
And McKenna Clay (2-micron). Also Canadian-
Mining Panshi for PP.
Penn plastic, Washington, INC.
Filling concentrate of PP and PE.
Clark and Daniels
Functional pigments, chemicals and fillers such as zinc, calcium, magnesium metal hard fat (
USP, FDA and Jewish)
, Precipitated ammonium sulfate, hydrated alumina, zinc sulfur, magnesium oxide, zinc oxide uv and hydroxide, calcium carbonate and ammonium sulfate, clay, cloud powder, polymer talc
ZEMEX industrial mineral fillers and enhancing agents include gold-Mica, plate Stone, Spar and calcium carbonate.
The motherboard has excellent bending strength, high elastic modulus and good heat-resistant deformation properties.
Wet and dry ground grade offers a full range of products to enhance PP, PE, ABS and other resins. Surface-
The level after processing is high-
Platy talcs are made of pure iron and low iron with a grade of high brightness, high purity and medium particle size less than 1 to 13 microns.